The iStrait 2.0

For a limited time receive a free e-pump with your iStrait 2.0

We designed the iStrait to take your adventures further. in 2020 we pioneered the first displacement (v-shaped) hull on an inflatable board. By tapering the cut of the drop stitch we created a hull shape that cuts water tension and tracks unerringly. 

If you’re heading off on a multi-day trip or just looking to go a bit further with a heap of kit, this is the board for you.

New for 2022 we introduced a triple layer military grade polymer shell and higher density dropstich core. We added a 6 and 4-point bungee system, paddle straps and Kayak Conversion Kit points. We also upgraded our 3-piece carbon paddle, added wheels to our carry backpack, and introduced an improved mountain deck pad.

Includes: New 3-Piece Carbon Paddle, Premium Wheeled Backpack, 9" Fin, Coil Leash, Double Action Pump, Waterproof Cellphone Case & Repair Kit.

11'6" Specifications

• Product Size: 11'6" x 30” x 4.7"
• Weight: 28.5 lbs
• Volume: 300L
• Recommended Rider Weight: up to 280 lbs

12'6" Specification

• Product Size: 12'6" x 30” x 4.7"
• Weight: 30 lbs
• Volume: 330L
• Recommended Rider Weight: up to 320 lbs

14' Specifications

• Product Size: 14' x 30” x 4.7"
• Weight: 31 lbs
• Volume: 340L
• Recommended Rider Weight: up to 330 lbs

Construction

• A triple layer military grade polymer shell is fused to our super reinforced dropstich core. Seams are heat fused and machine pressed to create industry leading durability and rigidity. 

How to use your ISUP

• Unpack the paddle board on a smooth, flat surface.
• Locate the pump and hose, and attach the hose to the pump by screwing the two parts together.
• Locate the valve on the top of the paddle board (near the tail) and unscrew the cap cover.
• Insert the end of the hose into the valve, pushing down and rotating a half turn until sealed.
• Pump until the gauge reads between 12 and 15 PSI and the board is firm.
• Remove the hose from the valve by quickly turning it a half turn then replace the valve.
• Flip the board over and install the rear fin.
• Happy Paddling!