iLegend

FREE SHIPPING IN CANADA OVER $200  SHIPPING ELSEWHERE WILL BE SUBJECT TO SHIPPING FEES • ALL PRICES IN CANADIAN DOLLARS

iLegend
iLegend
iLegend
iLegend
iLegend
iLegend
iLegend
iLegend

iLegend

$1,599.00

*2019 model now available for pre-order! Ready to ship by April 1st*

One of our most successful hard boards ever is now available as a durable iTUFF laminate inflatable with heat fusion technology. This touring shaped board will feature our 3D hull technology just like the iStraight that will allow it to glide silently through calm waters and handle small chop with ease. The artwork on the iLegend base was created by West Coast artist Carmen Rue and tells the story of conflict between the Comox and Cowichan Tribes on Forbidden Plateau in the heart of Vancouver Island. 

  • Product Size: 11'9" x 35" x 6"
  • Weight: 12 kgs
  • Fins: Touring 
  • iTUFF Advanced Lamination
  • At Cascadia we waited patiently to achieve the inflatable technology to meet our own stringent requirements. Working hand in hand with shapers, factories, and riders, we believe we’ve nailed it! The new 4.7" and 6” drop stitched core is machine spun into the PVC creating rigidity similar to a traditional epoxy board. The heavy duty PVC is now fusion welded with heat on all seams, creating a stronger hold than ever in a newer, lower profile and ultimately stiffer product. 

  • Unpack the paddle board on a smooth, flat surface.
  • Locate the pump and hose, and attach the hose to the pump by screwing the two parts together.
  • Locate the valve on the top of the paddle board (near the tail) and unscrew the cap cover.
  • Insert the end of the hose into the valve, pushing down and rotating a half turn until sealed.
  • Pump until the gauge reads between 12 and 15 PSI and the board is firm.
  • Remove the hose from the valve by quickly turning it a half turn then replace the valve.
  • Flip the board over and install the rear fin.
  • Remember to take your life jacket and a buddy with you. Enjoy your adventure!

11'9" Specifications

  • Product Size: 11'9" x 35" x 6"
  • Weight: 12 kgs
  • Fins: Touring 

Construction

  • iTUFF Advanced Lamination
  • At Cascadia we waited patiently to achieve the inflatable technology to meet our own stringent requirements. Working hand in hand with shapers, factories, and riders, we believe we’ve nailed it! The new 4.7" and 6” drop stitched core is machine spun into the PVC creating rigidity similar to a traditional epoxy board. The heavy duty PVC is now fusion welded with heat on all seams, creating a stronger hold than ever in a newer, lower profile and ultimately stiffer product. 

How to use your ISUP

  • Unpack the paddle board on a smooth, flat surface.
  • Locate the pump and hose, and attach the hose to the pump by screwing the two parts together.
  • Locate the valve on the top of the paddle board (near the tail) and unscrew the cap cover.
  • Insert the end of the hose into the valve, pushing down and rotating a half turn until sealed.
  • Pump until the gauge reads between 12 and 15 PSI and the board is firm.
  • Remove the hose from the valve by quickly turning it a half turn then replace the valve.
  • Flip the board over and install the rear fin.
  • Remember to take your life jacket and a buddy with you. Enjoy your adventure!