Free 🇨🇦 shipping on purchases over $250!
Whitecap iSUP
Whitecap iSUP
Whitecap iSUP
Whitecap iSUP
Whitecap iSUP
Whitecap iSUP
Whitecap iSUP
  • Availability: in stock Many in stock Out of stock You can purchase this product but it's out of stock

Whitecap iSUP

Shipping calculated at checkout.

    10' Whitecap iSUP is sold-out for the Summer 2021 season.

    11’ Whitecap iSUP will be back in stock and available to ship by mid-July. Limited availability. Pre-Order yours now! 

    Cascadia's 'go-to' super stable all around inflatable SUP that caters to paddlers of all skill levels. The Whitecap's faux wood finish is on par with some hard boards - we challenge you to tell the difference! 

    Accompanying fins, 3 piece aluminum adjustable paddle, leash, waterproof cellphone case, carrying backpack, pump and repair kit included

      10' Specifications
      • Product size: 10' x 33" x 6"
      • Weight: 19 lbs
      • Volume: 200L
      • Fins: Thruster - removable
      • Recommended Rider Weight: up to 195 lbs
      11' Specifications
      • Product size: 11' x 33" x 6"
      • Weight: 20.5 lbs
      • Volume: 255L 
      • Fins: Thruster - removable
      • Recommended Rider Weight: up to 260 lbs
      12' Specifications
      • Product size: 12' x 33" x 6"
      • Weight: 22 lbs
      • Volume: 295L 
      • Fins: Thruster - removable
      • Recommended Rider Weight: up to 290 lbs
      Shaper's notes
      • We shaped and built this inflatable board without compromise: it’s rigid, stable and durable with its wide shape, a 6-inch drop-stitch, double-layer PVC rails and consistent rocker.

      • Layers of marine grade PVC vinyl are fused together using an innovative heat technology, as opposed to the traditional adhesive procedure, creating a more durable and eco-friendly iSUP in comparison to others on the market.  
      How to use your ISUP
      • Unpack the paddle board on a smooth, flat surface
      • Locate the pump and hose, and attach the hose to the pump by screwing the two parts together
      • Locate the valve on the top of the paddle board (near the tail) and unscrew the cap cover
      • Insert the end of the hose into the valve, pushing down and rotating a half turn until sealed
      • Pump until the gauge reads between 12 and 15 PSI and the board is firm
      • Remove the hose from the valve by quickly turning it a half turn then replace the valve.
      • Flip the board over and install the rear fin
      • Remember to take your life jacket and a buddy with you. Enjoy your adventure!

      Based on 1 review Write a review