iStraight
CANADA'S PADDLE, SURF, & SKIM BOARD COMPANY • ALL PRICES IN CANADIAN DOLLARS
iStraight
$1,639.00
Stay on the straight and narrow while touring around on this sleek monochromatic SUP. The iStraight can do it all: from casual flat water paddles to overnight distance trips in a little chop.
- 11'6" Specifications
- Construction
- How to use your ISUP
- Product Size: 11'6" x 32" x 4.7"
- Weight: 13kgs
- Fins: 9" Touring
12'6" Specification
- Product Size: 12'6" x 32" x 4.7"
- Weight: 13.5kgs
- Fins: 9" Touring
14' Specifications
- Product Size: 14' x 32" x 4.7"
- Weight: 14
- Fins: 9" Touring
-
New for 2019, Cascadia switched to a heat-fusion construction technology for all of our inflatable SUPs; skipping the traditional adhesive process creates a stronger, more durable and eco-friendly product.
- Unpack the paddle board on a smooth, flat surface.
- Locate the pump and hose, and attach the hose to the pump by screwing the two parts together.
- Locate the valve on the top of the paddle board (near the tail) and unscrew the cap cover.
- Insert the end of the hose into the valve, pushing down and rotating a half turn until sealed.
- Pump until the gauge reads between 12 and 15 PSI and the board is firm.
- Remove the hose from the valve by quickly turning it a half turn then replace the valve.
- Flip the board over and install the rear fin.
- Remember to take your life jacket and a buddy with you. Enjoy your adventure!
11'6" Specifications
- Product Size: 11'6" x 32" x 4.7"
- Weight: 13kgs
- Fins: 9" Touring
12'6" Specification
- Product Size: 12'6" x 32" x 4.7"
- Weight: 13.5kgs
- Fins: 9" Touring
14' Specifications
- Product Size: 14' x 32" x 4.7"
- Weight: 14
- Fins: 9" Touring
Construction
-
New for 2019, Cascadia switched to a heat-fusion construction technology for all of our inflatable SUPs; skipping the traditional adhesive process creates a stronger, more durable and eco-friendly product.
How to use your ISUP
- Unpack the paddle board on a smooth, flat surface.
- Locate the pump and hose, and attach the hose to the pump by screwing the two parts together.
- Locate the valve on the top of the paddle board (near the tail) and unscrew the cap cover.
- Insert the end of the hose into the valve, pushing down and rotating a half turn until sealed.
- Pump until the gauge reads between 12 and 15 PSI and the board is firm.
- Remove the hose from the valve by quickly turning it a half turn then replace the valve.
- Flip the board over and install the rear fin.
- Remember to take your life jacket and a buddy with you. Enjoy your adventure!